Application
Fixtures live rough lives, so the core has to be repeatable
A retail fixture is handled hard. It is routed and drilled in the shop, boxed and shipped, built on site, and then reconfigured season after season. Vaultwood Core™, the specified premium MDF core, is chosen for that cycle because it is uniform and predictable.
A consistent 45 to 49 pcf density[2] means CNC routing, edge profiles, and hardware bores come out the same across a production run, and 275 to 350 lbf screw-holding[4] keeps brackets, standards, and connectors tight through repeated assembly and reset.
Spec guidance: for display panels and gondola components, standardize hardware locations so screws land in full-thickness core, and use Vaultwood Core in premium MDF, not HDF, when a paint-grade or laminate-ready face is the priority. Modulus of rupture over 4,500 psi[4] keeps shelves and headers flat under merchandising load. For fixtures placed in occupied stores and public spaces, specify the NAF option with TSCA Title VI[7] and CARB Phase 2[8] documentation.
The failure to avoid: a fixture whose connector points strip out after the second or third reset, or a routed edge that chips because the core was inconsistent. In high-turnover retail, a core that only works once is a core that fails.
Where a fixture needs to move or conceal, for instance a display wall that hides a passage, manufacturers can engineer the moving assembly on this core, specifying hardware to suit the finished assembly and its load.
Rolling out fixtures? Request Vaultwood Core specs or a NAF quote for your program.
Keep exploring: Applications hub · Cabinetry and casework
Vaultwood Core is an ingredient brand held to a published specification. Core values verified per ASTM D1037[4] and graded to ANSI A208.2[2]; emissions per EPA TSCA Title VI[7] and CARB Phase 2[8]; NAF and values on file[11]. Assembly load figures describe the finished products, not the core alone.